DENMARK

MORSO EH – MITRE CUTTING GUILLOTINE

Code No. 1012 .

The MORSO-EH is excellent for repetition work as :
• It is as fast as a double mitre saw.
• The cutting waste drops into a waste chute.
• The working procedure creates no dust.
• The noise level is below 70db.

WARRANTY: 1 YR
[ PROVIDED CORRECT USE AND MAINTENANCE ]
*warranty doesn’t cover the tear & wear such as blades, springs & measuring scales.

FEATURES

  • MORSO-EH is a fully automatic, electric /hydraulic mitring machine with a two hand release built in. This makes the machine absolutely safe, as it is impossible to operate the machine, and touch the knives at the same time.
  • With MORSO-EH you achieve the clean smooth cut by automatically cutting o? the section in two cuts, as long as both push buttons are activated at the same time.
  • The cutting time varies from one sec. and up, depending on the thickness of the work piece. Having ?nished the cutting the knife block automatically returns to the starting position.
  • The starting position (horizontal movement) is adjusted according to the width of the moulding and MORSO EH will automatically cut the work bit by bit.
  • The vertical movement of the knife block is also adjustable with three di? erent heights. Pos.1 for small work pieces, Pos.2 for medium size work pieces and Pos.3 for very thick pieces.

TOOL AND ACCESSORIES

  • Front safety gaurd
  • Waste chute
  • Second stop
  • Measuring scale up to 1500mm
  • Adjustable & automatic rebate support & clamping cylinders
  • Sliding longitudinal stop
  • Two hand release operation
  • Extension table for the left side, adjustable fences

TECHNICAL SPECIFICATION OF MORSO EH – MITRE CUTTING GUILLOTINE

Double mitre 45 °
Single mitre up to 90 °
Cutting width max 100mm[4”]
Cutting height max 180mm [7”]
Measuring scale up to 1500mm[60”]
Motor , three phase 1,1 kw
Pumping capacity 71/min
Working pressure 80bar
Square cutting 70/70 mm
Power transmission 660 kilos
Tank contents 8litre
Net Weight 135kgs