World No.1 mitre cutting machine for over a century.
The Morso second stop is useful for cutting short & long lengths without adjusting the measuring scale.
The waste chute is standard on all morso mitring machines, and also available as a spare part.
MORSO premium blades are specially produced using high quality hardness of HR 64 giving blades 6 -7 times longer life than all other brands.
MORSO reversible blades has been introduced in MORSO machine.
The Jyden blades are made out of one piece of steel only with 12 mm hardened material
Ideal for production work. Automatic reset of the rebate support to the adjusted width and height of the moulding after each cutting cycle. An efficient tool for saving time. It can be installed easily on MORSO -F/H
Safety wooden blade boxes are very strong and safe.
The manually operated digital measuring system is battery operated. It is provided with a magnetic display indicating the current position.
Morso blades are said to be the best and longest lasting in the market. They last upto 6 to 7 times longer than any other blade available in the market due to a unique hardness of the steel, and therefore longer life time. When the blades leave the factory in Denmark, all blades are hollow ground and the blades must always stay hollow ground. This is very important and in case you use a loal grinder you risk that the local grinder will start grind blades and you will start having problems with the corners.
Lion India has special grinding machines made by MORSO. These grinding machine has been pre-set by the Morso Dan List factory in Denmark to have the correct angle.Therefore all blades are automatically hollow ground by Lion India. All our operators are trained in the use of the machine, and all blades are inspected and quality checked before being returned to you. If you send the blades without any “chips”, this means just for a regular sharpening, we remove approx. 0.2mm of the special cutting steel. As there is approximately 19mm of cutting steel, a blade can last up to 100 sharpening. However,if there is a small chip, which can happen if the blades have hit a nail, a knot in the wood, the rebate supports, the bottom blades etc, we have to remove a lot of very good cutting steel which is obviously reducing the lifetime of the blade, but we will also have to charge you more for a grinding, as emoving a chip takes more time, and use more of our grinding stone. A set of blades can be reground until the total width is approx. 60mm, and when they reach this size, it will no longer be possible to re sharpen them.
**Always buy genuine MORSO Blade for longer life.
Global leaders of underpinner machines,double mitre saws,flexible and hard tabs and v-nail fasteners.
Optional accesories available for-
High-quality woodworking machines with patented dovetail keys.
Pioneer and Leaders in Mount Cutting and Packaging Machines.
This is the standard bevel-cutting head that comes with all machines.
This head offers the greatest versatility with regard to cut detail and overall utility. Excellent cut quality from V-grooves and foil mats on up to 3.5 mm mat can be produced.
The new 45° bevel head produces a wider, more dramatic bevel edge that many customers have become accustomed to.
This cutting head option works well on all mat types upto 3.5 mm in thickness, but is somewhat limited in its ability to cut very fine detail and small radius curves.
It’s designed especially for cutting mat from the rear, or non- presentation side of the mat.
Use this cutting head option when a delicate surface mat may be damaged by one of the front surface bevel cutting heads, or when cutting very thick or dense mats up to 4.4 mm in thickness. The 45° rear surface head can also be used to cut foam board with a bevel, which can facilitate the creation of thick mat spacers or foam board deep-bevel fabric wraps.
This tool head is developed especially for cutting foam board,softer, thicker foam-core materials and corrugated cardboard up to 5 mm. (3/16”) thick.
Plastic (PVC) and hardboard (backing board) material can also be cut from 2 to 3 mm thick. It also uses a wide gilde pad instead of a roller to avoid indentation of the softer foam board surface.
For cutting either openings or sizing of mat board, up to three 4.4 mm mats thickness.
Eliminates the sharp mat edges that can be difficult to handle when sized with a sharp bevel cut.
A unique tool for creating subtle, yet distinctive mat decoration and accents.
Any Shape or Corner design, as well as fonts and clip art can be elegantly embossed into the mat surface. The embossing tool can also be used to create scored creases on either side of a mat to help with folding mat board or cardboard for custom boxes and other items
Designed specifically for the vacuum series.
The wide Teflon foot guarantees a wide cutting footprint and superior accuracy especially on thick and hard materials (max 5mm)
It is an ergonomically designed PC stand with head carrousel attachment.
This head carrousel occasionally allows you to store all your Interchangable Heads on a colour- coded Carrousel. The rotating tray can be easily extended or reacted as needed for quick and easy access to any of the InterchangableHead
Using printed marks, Opti Crop, in combination with V-Studio and a camera, is capable of detecting the position of any printed material randomly placed on the work table, recognizing any print skew and, whenever needed, properly corrects the vector file before the cutting (plotting) process.
One-piece plastic handle
Save your Valiani bench and table top from the permanent damage with Valiani Metal Slip.
Valiani table Metal slip was created to provide maximum protection and to avoid any scratches on the cutting machine. Available in 2 sizes – Mat Pro Ultra 120 – 48” x 32” Mat Pro Ultra 150 – 60” x 40”
Corrugated Cardboard creasing wheel,
diameter 28 mm. Flat board and Flute E creasing wheel,
diameter 28 mm, round crest 1mm. Flat board and Flute E creasing wheel,
diameter 28 mm,round crest 2 mm.
Serrated cut wheel, diameter 28 mm, step
2.5 mm. Serrated cut wheel, diameter 28 mm, step
Polypropylene 250 gr / 500 gr scoring
wheel, diameter 28 mm.