Frame Cutting

SWEDEN

Nobex Proman is the ultimate solution for many tasks where exact mitre cuts are demanded with superior accuracy.

  • Code No. 2412

NOBEX / PROMAN 110 COMPOUND MITRE SAW

Ideal low cost machine for small framers or hobby framing, carpentry & craft working

FEATURES

  • Cuts all angles for making frames of all shapes
  • Auto lock for cutting 4, 5, 6, 8 & 12 sided frames
  • Max. Moulding height 110 mm (4.3”)
  • Max. width at 45 degree angle 100mm / 3.9”
  • Code No. 2413

NOBEX EX-ACT FRAMING EXTENSION

The EX-act Framing Extension is a valuable addition to the Nobex Proman mitre saw for picture framers

FEATURES

  • For most frames, you just measure the size of the picture and the width of the moulding, set the stop accordingly and cut the pieces.
  • It can handle frames from 3.5” to 27.5” long

PROMAN REPLACEMENT BLADES

  • 12 Threads per inch for soft wood mouldingCODE NO 2495

  • 18 Threads per inch for Plastic mouldingCODE NO 2496

  • 24 Threads per inch for Wood mouldingCODE NO 2494

  • 32 Threads per inch for Aluminium mouldingCODE NO 2497

DENMARK

World No.1 mitre cutting machine for over a century.

    • Code No. 1011
    • Code No. 1014

MORSO F MITRE CUTTING GUILLOTINE

The framer’s favourite the world over since 1911. A foot operated mitring machine from Danlist of Denmark.

FEATURES

  • Clean cut needs no finishing after cutting.
  • Cuts double mitre at 45 ° & single mitre up to 90 °.
  • Knife operation results in no dust environment.
  • No compressor or electricity needed.
  • Easy operation through special lever system.
  • Sliding scales ensures perfect measurement of frames.
  • Accurate repeat work and production
  • It is available in both metric &Inch measuring system

COMES EQUIPPED WITH

  • Safety gaurds
  • Waste chute
  • Sliding measurement stop
  • Measuring scale up to 1500mm
  • Left hand support table

WARRANTY : 5 YRS [PROVIDED CORRECT USE AND MAINTAINANCE] *do not cover the wear & tear such as blades , springs & measuring scales.

TECHNICAL SPECIFICATION OF MORSO F

Double mitre 45 °
Single mitre 90 °
Cutting width max 100mm (4”)
Cutting height 160mm (6 1/3”)
Measuring scale up to 1500mm (60”)
Weight 96kgs Approx

**In May 2005,Morso was presented with the Art Business Today Honours Award given in this cenetenary year of Art Business Today, to the company who have made the biggest impact in the last one hundred years in the Art and Framing Industry .

Morso scale

  • Set of 3 pcs comprise of long divided Beam , Short Beam & Stop BeamCODE NO 1006

  • DIVIDED BEAM
    Set of 2 pcs set Short & Long Beam.
    CODE NO 1015

  • STOP BEAMCODE NO 1017

  • STOP BLOCKCODE NO 1009
    • Code No. 1026
    • Code No. 1027

MORSO F DE-LUXE MITRE CUTTING GUILLOTINE

MORSO F DE-LUXE 1mtr Scale

MORSO F DE-LUXE 1.5mtr Scale

Precision engrave measuring scale is now standard on the deluxe mitring machine. The lines are colour coded for enhanced discrimination and size setting

FEATURES

  • Morso Model F De-Luxe mitring machine cuts double mitre at 45° and single mitre up to 90°. A wide variety of angled cuts can also be made.
  • Morso F De-Luxe leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining.
  • The horizontal movement of the knife block is stepwise adjustable.
  • The sliding longitudinal stop and measuring scale ensure accurate repeat work.
  • The special lever system of the machine ensure a very easy operation.
  • Twin return springs automatically bring the knives back to starting position.
  • Morso F De-Luxe is delivered with safety guard, sliding longitudinal stop, four coloured Visi mitre gauge, adjustable fences ( 45° – 90° ), right hand side extension table with supporting leg, and adjustable rebate supports.
  • The automatic rebate supports can be fitted onto the machine as accessories
  • Morso F De-Luxe can be available in Inch measuring system on special orders.

WARRANTY : 5 YRS [PROVIDED CORRECT USE AND MAINTAINANCE] *do not cover the wear & tear such as blades , springs & measuring scales.

TECHNICAL SPECIFICATION OF MORSO F DE-LUXE

Double mitre 45 °
Single mitre up to 90 °
Cutting width max 100 mm
Cutting height max 160 mm
Measuring scale up to 1000mm/1,500 mm
Weight 98 kgs
  • Code No. 1021

MORSO H – MITRE CUTTING GUILLOTINE

Morso H mitring machine works with the same simple principle as the Morso F, apart from being a pneumatic mitring machine.

FEATURES

  • The Morso H is operated by a secure two-hand release system, which makes it impossible for the fingers to touch the knives while working.
  • Again, there is no problems with dust, as all the waste will be lead directly into a bin (the bin is not delivered with the Morso H ) through the Morso Waste Chute, which is a standard accessory.
  • The air cylinder that pulls the knives through the work piece secures an easy and effortless working procedure, and therefore Morso H can with advantage be used for repetition work.
  • Morso H is delivered with safety guard, push button switch operation, longitudinal stop, measuring scale, adjustable fences (45° – 90°), adjustable rebate supports and waste chute.
  • As an extra accessory, the Morso Moulding Clamps for Morso H can be recommended.

COMES EQUIPPED WITH

  • Safety Guard
  • Two – hand release system
  • Waste chute,
  • Sliding longitudinal stop
  • Measuring scale up to 1500 mm
  • Adjustable fence ( 45-90 degree) and adjustable rebate support.
  • Left hand support table

WARRANTY : 1 YRS [PROVIDED CORRECT USE AND MAINTAINANCE] *warranty doesn’t cover the wear & tear such as blades , springs & measuring scales.

TECHNICAL SPECIFICATION OF MORSO H

Double mitre 45 °
Single mitre up to 90 °
Cutting width max 100mm
Cutting height max 165mm
Measuring scale up to 1500mm
Air pressure 6-8 bar
Hose connector min 10mm
Net Weight 90kgs
  • Code No. 1012

MORSO EH – MITRE CUTTING GUILLOTINE

MORSO-EH is a fully automatic, electric /hydraulic mitring machine with a two hand release built in. This makes the machine absolutely safe, as it is impossible to operate the machine, and touch the knives at the same time.

FEATURES

  • With MORSO-EH you achieve the clean smooth cut by automatically cutting off the section in two cuts, as long as both push buttons are activated at the same time.
  • The cutting time varies from one sec. and up, depending on the thickness of the work piece. Having finished the cutting the knife block automatically returns to the starting position.
  • The starting position (horizontal movement) is adjusted according to the width of the moulding and MORSO EH will automatically cut the work bit by bit.
  • The vertical movement of the knife block is also adjustable with three different heights. Pos.1 for small work pieces, Pos.2 for medium size work pieces and Pos.3 for very thick pieces.

The MORSO-EH is excellent for repetition
work as :

  • It is as fast as double mitre saw.
  • The cutting waste drops into a waste chute.
  • The working procedure creates no dust.
  • The noise level is below 70db.

COMES EQUIPPED WITH

  • Front safety gaurd
  • Waste chute
  • Second stop
  • Measuring scale up to 1500mm
  • Adjustable & automatic rebate support & clamping cylinders
  • Sliding longitudinal stop
  • Two hand release operation
  • Extension table for the left side, adjustable fences

WARRANTY : 1 YRS [PROVIDED CORRECT USE AND MAINTAINANCE] *do not cover the wear & tear such as blades , springs & measuring scales.

TECHNICAL SPECIFICATION OF MORSO EH

Double mitre 45 °
Single mitre up to 90 °
Cutting width max 100mm[4”]
Cutting height max 180mm [7”]
Measuring scale up to 1500mm[60”]
Motor , three phase 1,1 kw
Pumping capacity 71/min
Working pressure 80bar
Square cutting 70/70 mm
Power transmission 660 kilos
Tank contents 8litre
Net Weight 135kgs
  • Code No. 1022

MORSO EHXL – MITRE CUTTING GUILLOTINE

MORSO EXHL is a fully automatic electric / hydraulic mitring machine, with a noise level 70db-the perfect machine to cut picture mouldings for production of wooden, plastic and MDF mouldigs.

FEATURES

  • In principle MORSO EXHL does the same work as the MORSO F, but with the MORSO EXHL you have your work done automatically by pushing two buttons.
  • The MORSO EXHL is safe to operate as you must have activated both push buttons at the same time to have the machine work, and therefore you cannot get your fingers underneath the knives. With the MORSO EXHL you can do production work all day long.
  • The MORSO EXHL is available with three phase motor, voltage to your requirements.
  • The MORSO EHXL is also available with single phase motor.
  • Due to its design – the MORSO EHXL is ideal for female and elderly workers. No effort is require to cut the mouldings due to the dual hand operation system.

WARRANTY : 5 YRS [PROVIDED CORRECT USE AND MAINTAINANCE] *warranty doesn’t cover the wear & tear such as blades , springs & measuring scales.

World’s only mitring guillotine which can cut up to 150mm wide moulding

COMES EQUIPPED WITH

  • Front safety gaurd
  • Waste chute
  • Second stop
  • Measuring scale up to 1500mm
  • Adjustable & automatic rebate support & clamping cylinders
  • Sliding longitudinal stop
  • Two hand release operation
  • Extension table for the left side,
  • adjustable fences
  • Supporting legs

TECHNICAL SPECIFICATION OF MORSO EHXL

Double mitre 45 °
Cutting width max 150mm [6”]
Cutting height max 250mm[10”]
Deluxe measuring scale up to 2500mm
Motor, three phase 1.5 kw, 3.3amps
Pumping capacity 11.2 litre/min
Working pressure 80 bar
Tank contents 8 litre
Power transmission 660 kg
Net Weight 278kgs
  • Code No. 1023

MORSO EXHL SPARE BLADES ( 5 bolts )

  • Code No. 1024

JYDEN MITRE CUTTING GUILLOTINE

The Jyden brand is well known for its quality and long lasting and the machine is a price efficient mitring machine with good value for the money.

FEATURES

  • Jyden Mitring Machine, manually operated.
  • The Jyden machine works with a foot pedal, which means it does not require compressed air or electricity.
  • The Jyden machine is delivered with a measuring scale to 1500 mm and can cut mouldings up to 100 mm wide.
  • The blades are made from one piece of premium steel and hardend to a hardness of HR 60 which gives a significant number of cuts, before the blades will need to be resharpend.
  • The blades can be resharpend many times.
  • The Jyden machine cuts both plastic mouldings, MDF, soft and hard wood etc, but not aluminum.

COMES EQUIPPED WITH

  • Safety gaurds
  • Waste chute
  • Measuring scale up to 1500mm
  • Left hand support table

WARRANTY : 1 YRS [PROVIDED CORRECT USE AND MAINTAINANCE] *warranty doesn’t cover the wear & tear such as blades , springs & measuring scales.

TECHNICAL SPECIFICATION OF MORSO F

Double mitre 45 °
Single mitre 90 °
Cutting width max 100mm (4”)
Cutting height max 160mm (6 1/3”)
Measuring scale up to 1500mm (60”)
Weight 94kgs Approx

ITALY

Global leaders of underpinner machines,double mitre saws,flexible and hard tabs and v-nail fasteners.

  • Code No. 3769

T400 PNEUMATIC DOUBLE MITRE SAW

Vertical movement of double mitre saw with two blades fixed at 45 ° is useful for cutting picture, furniture, window and door frames, made of wood, plastic & aluminium.

FEATURES

  • Pneumatic device allows quick back stroke of blades and low air consumption.
  • Equipped with adjustable speed of blade’s descent.
  • Out feed measurement table and gauge.

TECHNICAL SPECIFICATION OF T400 PNEUMATIC DOUBLE MITRE SAW

Maximum cut size width – 100mm. height – 80mm
Max. production/hour upto 800 cuts/hour
Motors 2Nos. 2H.P.,2800rpm
Hole suction 100 mm dia
Electric power supply 380-420V 3 phase 50Hz
Power adsorption 3 KW
Pneumatic feed 100 PSI
Air consumption 100 PSI
Weight 500 kgs
Overall dimensions 1000x1000x1800(H)mm

OPTIONAL ACCESSORIES

  • Extension gauge and table (out feed 1200mm )CODE NO. 2015
  • Mechanical adjustment knob for blades stroke going upCODE NO. 2017
  • Mist cooling system for cutting aluminiumCODE NO. 2018
  • Dust collector unitCODE NO. 2019
  • Horizontal clamp system for aluminiumCODE NO. 2020

ITALY

Pioneers in corner joining and double blade saws for mitre cutting.

  • Code No. 3800

PRISMA MAXI

Manual sawing machine, with horizontal stroke, for “V-cutting” at 45 degrees, at both ends, in wood and plastic mouldings of any shape and kind

FEATURES

  • Precise graduate scale to gauge at the rabbet of the mitred moulding, right sliding stop and mechanical horizontal clamps.
  • With fixed fence.
  • Digital readout as optional (T024). Maximum operator safety.
  • Sound level: LAeq > 80 dB (A).
  • 45° cuts each head
  • Fixed fence
  • Automatic horizontal clamps
  • Robust and space efficient
  • No compressor needed
  • Mechanical horizontal cutting design
  • Ergonomically friendly design
  • Ideal for cutting wooden , plastic , aluminium Mouldings
  • Single phase power supply
  • 2 metre measuring extension
  • Collecting waste system
  • Full manual control over blade movement
  • Direct read off measuring scale
  • Quick and easy adjustment of profiles
  • 2 x 100mm extraction dust suction
  • Full visibility while cutting

COMES EQUIPPED WITH

  • 2 saw blades type HM d. 275mm,
  • 2 saw blades size bore d. 32mm
  • 2 moulding supporting arms l =1330mm (1 right, 1 left)
  • Adhesive measuring system l=2000mm right sliding stop
  • Mechanical horizontal clamps
  • Possibility to use saw blades d. 250mm

TECHNICAL SPECIFICATION OF PRISMA MAXI

Saws 2 Circular carbide saw blades upto 275 mm
Maximum cutting capacity 180mm ( width) 80mm (height)
Production rate About 200 cuts per hour [ it varries with mouldings dimensions]
Standard electric eqiupment 2 motors of 1.5 hp each – 2800 rpm, voltage -230 V 50Hz single phase
Sawdust exhaust outlets N° 2 diameter 100 mm
Weight 250 kg
Overall dimesions width 1380 mm , length 760 mm , height 1150 mm

OPTIONAL ACCESSORIES

  • T002d Moulding supporting arm l =1000 mm with leg
  • T005f Additional sliding measuring stop
  • T009e Moulding supporting arm (l = 1000 mm ) with leg and measuring system
  • T020 Waste pieces support
  • T024B Kit for digital reading of cutting length (inside/outside)
  • M020 Vertical pneumatic clamping unit
  • M034 Horizontal pneumatic clamping unit
  • M047 Horizontal & vertical pneumatic
  • clamping unit (with foot operated valve and air oil flter unit

PRISMA BLADE

AluminiumCODE NO 3801

PlasticCODE NO 3802

WoodCODE NO 3803

FEATURES

  • Brevetti Maxi or Prisma Saw Blades- 2 each highly sharpened Brevetti 80 carbide tooth saw blades. 275 x 3.2 x 32 mm; These are Brevetti brand blades,
  • Code No 2013

CIRCULAR SAW BLADES FOR T 400

FEATURES

Every user of a double mitre saw, seeks the perfect blades, The Blades are made of high strength steel.

Machines

ACCESSORIES & BLADES

  • Code No 3770

MANUAL BENCH DISK SANDER

Manual Bench disk sander, allows to recover perfectly cutting faults setting up the angle at 45 degrees.

FEATURES

  • It utilizes 30cm (12”) abrasive disks.
  • The Disk Sander consistence of construction and its working easiness are the safe life for a long term duration. Suitable in different working environments from handcraft to mass production.

TECHNICAL SPECIFICATION OF BENCH DISK SANDER

Working Angle 45°
Clamping type Mechanical
Movement Manual
Dimensions(body) 500X700X80 mm
Fly- wheeled diameter 30cm (12”) dia
  • Code No 2019

DUST COLLECTOR UNIT

The Dust Collector mainly designed for the industrial use with powerful suction ability, Dust Collector efficiently captures dust, no matter what the shape and size are.

FEATURES

  • Minimum maintenance, continuous running , low noise level (65 db)
  • Compact in size, easy mobility and robust in construction to suit industrial applications Multi utility dust collector and having the adaptability for customization
  • Pressure die-casting blower with balanced impeller, low running temperature

TECHNICAL SPECIFICATION OF DUST COLLECTOR

Model AMDC-B30
Power[KW/HP] 3 KW
Suction capacity[Mm of WG] 200
Air flow M3/Hr 3200
Collection capacity 100 Lit(**)
Suction Port size 80mmX3
Duty S1
Noise level 72
Machine Dimension [L B. H] 1250*600*800mm