Frame Joining

INDIA

Quality machine tools

    • Code No. 2655
    • Code No. 2658

EASY HAND UNDER PINNER
MOULDING VICE

( IDEAL FOR SMALL FRAMERS AND HOBBY WORK )

The combination of these two economical (simple to install and operate)tools makes excellent joints of the mouldings with the aid of some V nails which are used on the professional machines

FEATURES

  • Vice clamps moulding up to 3” width and frames down to 3”x3”, the jaws of the vice are designed to give firm grip to the moulding
  • The well-engineered mechanism helps insert one V nail at a time to be used for joining by operator
  • The positioning of the V nail in the joint is done manually by the operator at any desired point
  • The combination of these tools can be installed on a small table and if needed can be easily shifted to different work sites

ITALY

Global leaders of underpinner machines,double mitre saws,flexible and hard tabs and v-nail fasteners.

  • Code No. 3768

U 200 [MINIGRAF A2M]

The Minigraph U 200 is the new manual foot operated frame assembly machine with a simplified design.

FEATURES

  • The technology applied for the mechanical components ensures the same heavy duty and reliability performances as all the other machine in the Alfamacchine range.
  • The U200 is well situated for low levels of production,hobby trade, beginners or areas where noise is a major concern.
  • The only manual machine which can join moulding up to130 mm wide it offers a lot of advantages such as –
    • Tilting bench
    • Easy to use and reduced weight
    • Best Selling Manual Machine
    • Front or rear operating mode
    • Minimum servicing
    • The machine is delivered in an assembled kit box and is easily remembered in a few minutes for use.

Best selling manual machine

TECHNICAL SPECIFICATION OF U200

Moulding thickness 6mm to 90mm
Moulding width up to 130mm (5”)
Type Pedestal
Weight 38 kgs
Dimension 380 x 600 x 1150
  • Code No. 0829

U500 MEMORY PROGRAMMED/SINGLE -CHANNEL

This machine has been designed for production shops which need to change over frequently

FEATURES

  • Its Memory Program technology is “State of the Art” allowing profile data for unlimited frames to be entered or downloaded from a PC
  • Once this information is stored, the operator then “brings up” the next frame to be produced or scans with the optional bar code reader
  • This machine will automatically adjust and production can restart immediately. V-nails can be driven or stacked in up to 10 positions per corner
  • This machine is very fast and easily drives all types of wood, plastic and MDF

TECHNICAL SPECIFICATION OF U 500

Frames thickness 5mm to 80mm
Frame width min – max 6 -105 mm
Max dist. Among v-nails 145 mm
Storage capacity n. 220
Pneumatic feed 6÷7 bar
Air consumption 4 Nl at 5 bar
V-nails size 7-10-15 mm
V-nails size on request 3-4-5-12 mm
Weight about 135 kgs
Working bench height 960 mm
Overall dimensions 770x770x1500 mm
  • Code No. 0830

U600 MEMORY PROGRAMMED MULTICHANNEL

The New U600 MINIGRAF MP Multi-Channel is the evolution of our standard Memory Program Machine, it has the same ease of use, speed, and precision of assembly.

FEATURES

  • The Multichannel version has five different nail magazines containing v-nails of different heights, 5mm, 7mm,10mm,12mm, and 15mm. In the same working cycle, the operator can insert and/or stack different v-nail heights in several different positions.
  • The Memory Program technology is ”State of the Art” allowing you to store unlimited different programs & can also be downloaded to the machine by using a PC.
  • Once this information is stored, the operator then selects the next frame to be used, either by using the keypad or with the optional Bar-code scanner.
  • The machine automatically adjusts itself and production can restart immediately. The Memory Program Multichannel does not have an equal in terms of ease of use, programming, or rapid assembly of your products (it takes 1 second to insert 2 nails in two different positions at a distance of 3 centimeters between the nail positions).

TECHNICAL SPECIFICATION OF U600 MEMORY PROGRAMMED MULTICHANNEL

Frames thickness min – max 5mm to 80mm
Frame width min – max 6-105 mm
Max dist. Among v-nails 145 mm
Storage capacity n. 220 x 5
Pneumatic feed 6÷7 bar
Air consumption 5 bar
V-nails size 5-7-10-12-15 mm
Weight about 150,00 kg
Working bench height 960 mm
Overall dimensions 770x770x1500 mm
  • Code No. 0826

U300 SEMI-AUTO/PNEUMATIC UNDERPINNER

U300 is the most popular model with custom framers. Alfamacchine has manufactured over 40,000 units and it is the best selling model world wide

COMES EQUIPPED WITH

  • Special horizontal clamp to hold mouldings tightly together and create a perfect picture joint
  • Pneumatic fence clamp for automatic locking of the mouldings in the desired position for inserting of V nails
  • Quick replacement magnetic pressure pads for every kind of profile
  • Dual function foot operated pedal for separate control of clamping and V nail’s driving.
  • Pneumatic loading valve, to open the V nail magazine for quick changing.
  • Blocks for 7mm , 10mm & 12mm V nails

Best selling manual machine

TECHNICAL SPECIFICATION OF U300

Moulding thickness 6mm to 90 mm
Moulding width up to 100 mm
Pneumatic feed 3 – 6 bar
Weight 35 kgs Approx.
Dimension 480 x 300 x 300mm
Max nail position multiple
  • Code No. 0826-S

U300 MINIGRAF – 3 STAND

  • The stands are designed to install U300 machine on the stand safely.
  • Very useful and a must buy

COMES EQUIPPED WITH

  • Stand
  • Small box with lock to keep spare parts and consumables frequently required
  • Air gun for cleaning the working area.
  • FRL unit for keeping the machine free from water & oil.
  • Code No. 0827

U300P SEMI-AUTO/PNEUMATIC/PRODUCTION UNDERPINNER

U300P has been designed for production of small and medium sized frames.

FEATURES

  • The U300P is equipped with a nail driver assembled on a movable carriage controlled pneumatically by the operator
  • The three positions version allows the V nail insertion at 3 separate positions one after the other.

COMES EQUIPPED WITH

  • Quick replacement magnetic pressure pads suitable to control clamping and V nail driving.
  • Horizontal clamp device to hold tightly together, the mouldings and create a perfect joint.
  • Pneumatic loading valve, to open the V nails magazine for quick changing.
  • Soft moulding clamp device, to adjust the air pressure during the several work stages
  • Adjustable tilting fence

TECHNICAL SPECIFICATION OF U300P SEMI-AUTO/PNEUMATIC/PRODUCTION UNDERPINNER

Moulding thickness 6mm to 90mm
Moulding width up to 125mm
Pneumatic feed 4 – 6 bar
Weight 36 kgs
Height of working bench 130mm
Overall dimensions 640 x 350 x 470 mm
Max nail positions 3
  • Code No. 0827-S

U300P MINIGRAF – 4 STAND

  • This is designed to install U300P machine on the stand safely

COMES EQUIPPED WITH

  • Stand
  • Small box with lock to keep spare parts and consumables frequently required
  • Air gun for cleaning the working area.
  • FRL unit for keeping the machine free from water & oil.

GERMANY

High-quality woodworking machines with patented dovetail keys.

  • Code No. 5003

HOFFMANN X_LINE 20 MANUAL DOVETAIL ROUTING MACHINE

Portable and flexible bench top machine , for routing a single dovetail slot with each machine cycle.

Hoffmann key sizes W-1/2/3 . Most of the relevent accessories can be used on this machine.

Option for twin version with a double spindle gearbox to produce two dovetail slots per machine cycle on special orders

TECHNICAL SPECIFICATION

Power Supply 1ph/N/PE 230 V 50/60Hz 0.5kW
Motor 1x 530W
Motor Speed 29000 1/min
Control / Work – piece Clamping manual / manual
Height Capacity 110mm
Routing Depth 0-80mm
Extraction port Ø 60 mm
Hoffmann key sizes W -1/2/3
Dimensions W/D/H 600/540/770mm
Weight 19 kg
  • Code No. 5004

HOFFMANN X_LINE 25 PNEUMATIC DOVETAIL ROUTING MACHINE

Portable and flexible bench top pneumatic machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W -1/2/3 suitable for smaller production runs. Most of the relevent accessories can be used on this machine.

TECHNICAL SPECIFICATION

Power Supply 1ph/N/PE 230 V 50/60Hz 0.5kW
Motor 1x 530W
Motor Speed 29000 1/min
Control / Work – piece Clamping pneumatic
Height Capacity 95mm
Routing Depth 0-75mm
Extraction port Ø 60 mm
Hoffmann key sizes W -1/2/3
Dimensions W/D/H 600/540/580mm
Weight 20 kg
Pneumatic Air Supply 6 bar
  • Code No. 5001

HOFFMANN MU2 MANUAL DOVETAIL ROUTING MACHINE

Portable and flexible bench top robust machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W -1/2/3/4

TECHNICAL SPECIFICATION

Power Supply 1ph/N/PE 230V 50/60Hz 1.0 kW
Motor 1x 1000W
Motor Speed 34000 1/min
Control / Work – piece Clamping manual / manual
Height Capacity 125mm
Routing Depth 0-85mm
Extraction port Ø 60 mm
Hoffmann key sizes W -1/2/3/4
Dimensions W/D/H 680/600/700mm
Weight 29 kg
  • Code No. 5002

HOFFMANN MU2P PNEUMATIC DOVETAIL ROUTING MACHINE

Portable and flexible bench top robust pneumatic machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W -1/2/3/4

TECHNICAL SPECIFICATION

Power Supply 1ph/N/PE 230V 60/60Hz 1.0 kW
Motor 1x 1000W
Motor Speed 34000 1/min
Control / Work – piece Clamping pneumatic/pneumatic
Height Capacity 150mm
Routing Depth 0-75mm
Extraction port Ø 60 mm
Hoffmann key sizes W -1/2/3/4
Dimensions W/D/H 680/600/500mm
Weight 32 kg
Pneumatic Air Supply 6 bar