Hotpress Consumables

UK

UK’s leading manufacturer of framing,photographic and print presentations.

PRESSURE SENSITIVE LAMINATION – THE HOWS AND WHYS

Before processing, make sure that the image is clean & free of dust or specks of lint (an Anti-Static Wisk is recommended for this purpose). To prevent adhesives from sticking to the rollers & to provide a reusable, standard working surface, the use of a silicone-coated board (also known as a “Carrier Board”) is highly recommended.

LAMINATING WITH JET MOUNTER TM LAMINATOR

  • Raise the top roller & insert the Carrier Board.
  • Pre-cut as a sheet of overlaminating film from the roll. (The sheet should be larger than the image by approximately 1” on each side & bottom, & 2” on the Top).
  • Peel & fold back approximately 2” of release liner from the top edge of the overlaminating film. Track the film on the Carrier Board by pressing the exposed section of film onto the leading edge of the board.
  • Start the Carrier Board into your laminator using the Foot Pedal mode. Stop before the edge of the laminating film reaches the rollers.
  • Lift up the remainder of the overlaminating film (which is still protected by the release liner) & slide the image face up underneath it. Stop before it makes contact with the exposed part of the adhesive. It is important to keep the film adhesive away from the artwork until the whole assembly is under pressure & traveling through the JetMounter TM
  • Lay the laminating film over the top of the upper roller liner with one hand, start the rollers & apply the overlaminating film to the surface of the image. Pull up & away on the release paper as your work piece travels through the laminator does not reach the point where the image makes contact with the top roller with a consistent motion & do not stop until the entire image has passed through the rollers.
  • The laminated image can now be easily removed from the silocone-coated carrier Board for trimming & mounting.

MOUNTING BOARD SELECTION

  • Foam Boards
  • Illustration Board
  • Rag Board
  • Glass Plaque
  • Acrylic
  • MDF (medium density fiberboard)Corrugated Plastic Boards
  • Corrugated Plastic Boards
  • Rigid Plastic Boards
  • Tempered hardboards: Masonite

CLOCK PLAQUE [BLACK]

WITH METAL ROD

Item Code Size
CLK001 6” X 8”
CLK002 8” X 10”
CLK003 10” X 12”
CLK004 4” X 12”
CLK005 4” X 18”

NAME PLATE [BLACK]

WITH METAL ROD

Item Code Size Qty per Box (Pcs)
NMP01 3” X 12” 85
NMP02 4” X 12” 85
NMP03 4” X 18” 85
  • CODE NO. GB0406
  • CODE NO. GB0408
  • CODE NO. GP0810

GLASS PLAQUE

6’’ X 4’’

6’’ X 8’’

8’’ X 10’’

FEATURES

  • Bevelled Glass Plaque specifically designed for photo Prints .
  • Glass Plaque is suitable for photograph, Prints, etc.
  • Each Glass plaque is Pre Sized to fit the regular sizes
  • Glass plaque can be mounted on a wooden plaque to make it look nice
  • CODE NO. AC0406
  • CODE NO. AC0507

ACRYLIC BLOCK

6’’ X 4’’

5’’ X 7’’

FEATURES

Thickness on high quality 20 mm polished acrylic. The acrylic block looks nice & a great Personalised product .It gives nice 3D effect after lamination with transperancy fynart film and velvet covering on the back.

PHOTO PLAQUE

FEATURES

  • The photo plaque is a great way to display your sweet memorable photos
  • Photo plaque is designed for keeping your Photographs, without the hassle of finding a frame.
  • Safe-no glass
  • Photo Plaque offers a clean professional look and a wide range of possible surface finishes and textures. Use the steel rod for vertical or horizontal for tabletop display.
  • Colour available :Black, Yellow, Blue Red

Available in standard sizes –

Size Description Code
4 x 6 Single window PP0406 1W
4 x 6 Double window PP0406 2W
6 x 8 Single window PP0608 1W
8 x10 Single window PP0810 1W
3.5 x3.5 Four window PP3535 4W

New photo plaque [ with 1” bezel]

Size Description Code
4 x 6 Single window PK0406
5 x 7 Single window PK0507
6 x 8 Single window PK0608
8 x10 Single window PK0810
8 x11 Single window PK0811
8 x12 Single window PK0812
  • CODE NO. 0221
  • CODE NO. 0222

COASTER

3.5” x 3.5” 4mm

4.5” x 4.5” 4mm

FEATURES

  • Coaster made of MDF with cork base ideal for lamination in vacuum press.
  • An exellent personalised product for gifting and promotion.
  • CODE NO. 0230
  • CODE NO. 0231

TABLE MAT

9” x 12” 4mm

11” x 17” 4mm

FEATURES

  • Table mats made of MDF with cork base ideal for lamination in vacuum press