DENMARK

MORSO EH – MITRE CUTTING GUILLOTINE

Code No. 1012 .

The MORSO-EH is excellent for repetition work as :
• It is as fast as a double mitre saw.
• The cutting waste drops into a waste chute.
• The working procedure creates no dust.
• The noise level is below 70db.

WARRANTY: 1 YR
[ PROVIDED CORRECT USE AND MAINTENANCE ]
*warranty doesn’t cover the tear & wear such as blades, springs & measuring scales.

FEATURES

  • MORSO-EH is a fully automatic, electric /hydraulic mitring machine with a two hand release built in. This makes the machine absolutely safe, as it is impossible to operate the machine, and touch the knives at the same time.
  • With MORSO-EH you achieve the clean smooth cut by automatically cutting o􀀀 the section in two cuts, as long as both push buttons are activated at the same time.
  • The cutting time varies from one sec. and up, depending on the thickness of the work piece. Having 􀀀nished the cutting the knife block automatically returns to the starting position.
  • The starting position (horizontal movement) is adjusted according to the width of the moulding and MORSO EH will automatically cut the work bit by bit.
  • The vertical movement of the knife block is also adjustable with three di􀀀 erent heights. Pos.1 for small work pieces, Pos.2 for medium size work pieces and Pos.3 for very thick pieces.

TOOL AND ACCESSORIES

  • Front safety gaurd
  • Waste chute
  • Second stop
  • Measuring scale up to 1500mm
  • Adjustable & automatic rebate support & clamping cylinders
  • Sliding longitudinal stop
  • Two hand release operation
  • Extension table for the left side, adjustable fences

TECHNICAL SPECIFICATION OF MORSO EH – MITRE CUTTING GUILLOTINE

Double mitre 45 °
Single mitre up to 90 °
Cutting width max 100mm[4”]
Cutting height max 180mm [7”]
Measuring scale up to 1500mm[60”]
Motor , three phase 1,1 kw
Pumping capacity 71/min
Working pressure 80bar
Square cutting 70/70 mm
Power transmission 660 kilos
Tank contents 8litre
Net Weight 135kgs