DENMARK

MORSO NXSEH Pneumatic Notch Cutting Machine

Code No. 8022S .
CUTTING WIDTH UP TO 8", DUST-FREE
CUTTING WIDTH UP TO 8", DUST-FREE
CUTTING WIDTH UP TO 8", DUST-FREE
CUTTING WIDTH UP TO 8", DUST-FREE

To compare MORSO – NXEH with a moulding machine the following points must be considered:
1.A cleaner and more constantly accurate cut will be produced with MORSO – NXEH.
2.The MORSO – NXEH is almost silent by comparison
3.The MORSO – NXEH produces no dust and therefore requires no extraction.
4.The MORSO – NXEH requires less than 15 minutes to change the cutting blades, to the set-up, and to the positioning of the stops.
5.As the blades wear, the 45o angle remains unchanged, ensuring consistently accurate joints.

Upon request: Fences 2500mm (100”) supplied with extra extension table and supporting leg

FEATURES

  • The Morso NXEH range of notching guillotines are automatic, electric/hydraulic, strong, heavy duty, machines which will last for several years. They are dust free and operated by a 100% dual hand release system, ensuring that the operator cannot touch the knives during the cutting cycle.
  • No compressed air and no expensive dust extraction is required.
  • The Morso NXEH guillotines are using the same cutting principles as the Morso NFX, including the moveable fence system - just doing the complete cutting cycle automatic.
  • The easy and 100% safe operation makes the Morso NXEH machines the ideal machine for male as well as female workers.
  • The Morso NXEH cuts hard wood, soft wood, MDF, plastic etc, and leaves the cutting surface of the material with an unbeatable, professional smooth surface, requiring no further preparation before joining.
  • The Morso NXEH is CE certified

TOOL AND ACCESSORIES

  • One set of hydraulic moulding clamps
  • Automatic adjustable cutting cycle
  • Automatic adjustable cutting height, reducing a complete cycle to less than 1,5 seconds
  • 100% safe dual hand operation system

TECHNICAL SPECIFICATION OF MORSO NXSEH Pneumatic Notch Cutting Machine

Nose width 6 – 20 mm (1/2” -1 1/ 1/8”)
Cutting width max. 200 mm (8”)
Cutting height max. 140 mm (5.5”)
Fences, left & right 1500 mm (60”)
Extension tables, left & right 1000 mm (40”)
Pumping capacity 7 liters / min
Working pressure 80 bar
Power transmission 660 kgs (1455 lbs)
Tank contents 8 ltrs.
Motor three phase or single 1.1 kW
Net weight 145 kg
Download Documents